CCNP Data Center Question of the Week: Cisco IMC

If you select Shared LOM NIC mode in the Cisco IMC Configuration Utility, which ports can access the Cisco IMC?

A. The ports on an installed Cisco network adapter card
B. The two 1-Gb Ethernet ports
C. The two 10/100 management ports
D. The two 10/100 management ports, but each port must be at defaults

Reveal Answer

Answer: B.

When you select the LAN on Motherboard NIC, then the two 1 Gig Ethernet ports are used.  Note, on the newer platform, there may be a single 10Gig Ethernet port, therefore which would be the port used on those platform.

 

Related Courses
DCUCI – Data Center Unified Computing Implementation v5.0
DCUFI – Implementing Cisco Data Center Unified Fabric v5.0
DCUCD – Designing Cisco Data Center Unified Computing v5.0
DCUFD – Designing Cisco Data Center Unified Fabric v5.0
DCUCT – Troubleshooting Cisco Data Center Unified Computing v5.0
DCUFT – Troubleshooting Cisco Data Center Unified Fabric v5.0

Related Certification
CCNP Data Center

CCNP Data Center Question of the Week Series

• CCNP Data Center Question of the Week: Cisco Technology
• CCNP Data Center Question of the Week: Aggregation Layer
• CCNP Data Center Question of the Week: Connecting Multiple Data Centers
• CCNP Data Center Question of the Week: Cisco FabricPath
• CCNP Data Center Question of the Week: Scalability in OTV
• CCNP Data Center Question of the Week: Cisco Nexus 7000 Line Cards
• CCNP Data Center Question of the Week: Layer 3 Card
• CCNP Data Center Question of the Week: Cisco IMC

from
CERTIVIEW